Software⏱️ 4 min read📅 2026-06-19

How to Fix 0xC00000E9 Error – Windows To Go boot error 0xC00000E9 on USB 3.0 ports

Windows To Go boot error 0xC00000E9 on USB 3.0 ports, Windows believes there is a problem with the OS's files.

Quick Answer: Try using a different USB 3.0 port or updating the IronKey device's firmware.

📋 Table of Contents

  1. ⚠️ Common Causes
  2. 🚀 How to Resolve This Issue
  3. 💡 Conclusion

Windows To Go is a feature that allows users to run a full Windows operating system from a USB drive. However, some users are experiencing an error code of 0xC00000E9 when trying to boot their device via a USB 3.0 port. This error message typically indicates that there is a problem with the OS's files, but in this case, the issue seems to be specific to USB 3.0 ports.

This error can be frustrating for users who rely on Windows To Go for work or personal use. The fact that it boots fine on a USB 2.0 port suggests that there might be an issue with the USB 3.0 hardware or drivers, but further investigation is needed to confirm this.

⚠️ Common Causes

  • The primary cause of this error could be related to the way Windows To Go handles USB 3.0 ports. It's possible that the device is not properly recognized or configured for use with a USB 3.0 port, leading to the error. This might be due to a driver issue or a compatibility problem between the operating system and the USB 3.0 hardware.
  • Another potential cause could be related to the IronKey device itself. It's possible that there is a firmware issue or a hardware problem with the device that is causing it to malfunction on USB 3.0 ports.

🚀 How to Resolve This Issue

Update Windows To Go drivers and configure USB 3.0 port settings

  1. Step 1: Open the Device Manager and locate the IronKey device. Right-click on the device and select 'Properties'. In the Properties window, click on the 'Details' tab and look for any driver updates available. Install any available drivers to ensure that the device is properly configured.
  2. Step 2: Next, open the Control Panel and navigate to the 'Device Manager' section. Locate the USB 3.0 ports and right-click on them to select 'Properties'. In the Properties window, click on the 'Settings' tab and make sure that the 'USB 3.0 ports' are set to 'Enabled'. You may also need to adjust any other settings related to USB 3.0 ports, such as the bandwidth or power management settings.
  3. Step 3: After making these changes, restart your computer and try booting from the USB drive again. If the issue persists, proceed with further troubleshooting steps.

Perform a clean installation of Windows To Go on a new USB 3.0 port

  1. Step 1: Connect the IronKey device to a different USB 3.0 port on your computer that is not currently in use. Make sure that this port is compatible with your operating system and has no other devices connected to it.
  2. Step 2: Create a new Windows To Go installation media using a clean installation of Windows. This will ensure that all files are properly configured and there are no issues with the OS's files.

💡 Conclusion

If you have tried both methods above and still encounter the error code 0xC00000E9, it may be worth trying further troubleshooting steps or seeking assistance from Microsoft support. Additionally, if you suspect that there is a hardware issue with your IronKey device, you may want to contact the manufacturer for further assistance.

Did this fix your problem?

If not, try searching for specific error codes.

🔍 Search Error Database

❓ Frequently Asked Questions

🛠️ Related Fixes

How to Fix: Pc crashes shortly after launching game (rainbow

Fix Pc crashes shortly after launching game (rainbow six siege). Compl

How to Fix: Installing an APK on a locked down phone

Installing an APK on a locked down phone: Try using a rooted device, e

How to Fix: New PC build- no signal and no clue

Fix New PC build- no signal and no clue. Complete troubleshooting guid