How do I fix: 🔍 Why This Happens?

The primary reason for this error is the incompatibility between the new version of Kali Linux and the hardware's ACPI (Advanced Configuration and Power Interface) settings. When the system boots, it tries to access the ECOR region, but since there is no handler for it, the system fails to load.Anot

How do I fix: Configuring ACPI Settings Manually?

Step 1: Open a terminal and run the command `sudo apt-get update && sudo apt-get install intel-ucode` to update the Intel Ucode package.Step 2: Run the command `sudo intel-ucode -update` to update the Ucode settings. This may take some time, depending on your system's configuration.

Software⏱️ 3 min read📅 2026-06-11

How to Fix: After upgrade to Kali 16.02, ACPI Error: No handler for region [ECOR]....

Q: Best Solutions to Fix It Reinstalling Kali Linux from Scratch?

Step 1: Boot into a live environment using a USB drive or CD/DVD. Make sure to download the latest version of Kali Linux.Step 2: Unmount the existing installation and delete all partitions. Then, create a new partition for your root filesystem and format it with ext4.Step 3: Reinstall Kali Linux fro

ACPI error fix for Kali Linux upgrade

Quick Answer: Try updating the BIOS or UEFI firmware to resolve the issue.

📋 Table of Contents

🔍 Why This Happens
✅ Best Solutions to Fix It
✨ Wrapping Up

The error 'ACPI Error: No handler for region [ECOR]....' is a common issue encountered after upgrading to Kali Linux 16.02, specifically in rolling releases. This problem affects users who have recently updated their system and are experiencing booting display issues.

This error can be frustrating as it prevents the system from displaying the hard drive size during boot-up, causing confusion for many users. However, with the steps outlined below, you should be able to resolve this issue and get your system up and running smoothly.

🔍 Why This Happens

The primary reason for this error is the incompatibility between the new version of Kali Linux and the hardware's ACPI (Advanced Configuration and Power Interface) settings. When the system boots, it tries to access the ECOR region, but since there is no handler for it, the system fails to load.
Another possible cause could be a problem with the kernel or the BIOS/UEFI firmware of your system.

✅ Best Solutions to Fix It

Reinstalling Kali Linux from Scratch

Step 1: Boot into a live environment using a USB drive or CD/DVD. Make sure to download the latest version of Kali Linux.
Step 2: Unmount the existing installation and delete all partitions. Then, create a new partition for your root filesystem and format it with ext4.
Step 3: Reinstall Kali Linux from the live environment, selecting the 'Advanced' option during the installation process. This will allow you to configure the system's ACPI settings manually.

Configuring ACPI Settings Manually

Step 1: Open a terminal and run the command `sudo apt-get update && sudo apt-get install intel-ucode` to update the Intel Ucode package.
Step 2: Run the command `sudo intel-ucode -update` to update the Ucode settings. This may take some time, depending on your system's configuration.

✨ Wrapping Up

To resolve the 'ACPI Error: No handler for region [ECOR]....' issue in Kali Linux 16.02, you can try reinstalling from scratch or configuring ACPI settings manually. If you're not comfortable with these steps, consider seeking assistance from a system administrator or a technical support expert.

Did this fix your problem?

If not, try searching for specific error codes.

🔍 Search Error Database

❓ Frequently Asked Questions

🛠️ Related Fixes

How to Fix: Pc crashes shortly after launching game (rainbow

Fix Pc crashes shortly after launching game (rainbow six siege). Compl

How to Fix: Installing an APK on a locked down phone

Installing an APK on a locked down phone: Try using a rooted device, e

How to Fix: New PC build- no signal and no clue

Fix New PC build- no signal and no clue. Complete troubleshooting guid