Software⏱️ 3 min read📅 2026-06-11

How to Fix: atombios stuck in loop for more than 5 seconds - Ubuntu installation error

Learn how to fix: atombios stuck in loop for more than 5 seconds - Ubuntu installation error.

Quick Answer: Try checking your system settings or restarting.

📋 Table of Contents

  1. 🛑 Root Causes of the Error
  2. 🔧 Proven Troubleshooting Steps
  3. 💡 Conclusion

The 'atombios stuck in loop for more than 5 seconds' error is an issue that affects users who are trying to install Ubuntu 14.04.3 LTS on their HP G62 laptops with ATI Mobility Radeon HD 545v graphics cards and Windows 8 operating system. This problem occurs when the installation process gets stuck in a loop, preventing the user from completing the installation process.

This error is frustrating because it prevents users from successfully installing Ubuntu, which can be a significant inconvenience for those who want to switch to an open-source operating system. To resolve this issue, we will need to identify the root cause of the problem and apply one or more fixes.

🛑 Root Causes of the Error

  • The primary reason why 'atombios stuck in loop for more than 5 seconds' occurs is due to a conflict between the ATI Mobility Radeon HD 545v graphics card and the Ubuntu installation process. The graphics card's drivers are not compatible with the Ubuntu installation process, causing the system to get stuck in an infinite loop.
  • Another possible cause of this error is a problem with the BIOS firmware, which may be incompatible with the Windows 8 operating system or the Ubuntu installation process.

🔧 Proven Troubleshooting Steps

Disable Intel Graphics and Enable ATI Graphics

  1. Step 1: Open the Device Manager in Windows 8 by typing 'devmgmt.msc' in the Run dialog box. Expand the 'Display Adapters' section and right-click on the Intel Graphics device. Select 'Disable device'.
  2. Step 2: Restart the computer and enter the BIOS setup (usually by pressing F2, F12 or Del during boot-up). Ensure that the ATI Mobility Radeon HD 545v graphics card is set as the primary graphics adapter.
  3. Step 3: Save the changes and exit the BIOS setup. The computer should now boot into Windows 8 with the ATI Graphics driver enabled.

Update the BIOS Firmware

  1. Step 1: Download the latest BIOS firmware for the HP G62 laptop from the manufacturer's website or a reputable third-party source.
  2. Step 2: Create a bootable USB drive using the downloaded BIOS firmware and follow the on-screen instructions to update the BIOS. This process may take several minutes, so be patient.

💡 Conclusion

To resolve the 'atombios stuck in loop for more than 5 seconds' error, try disabling Intel Graphics and enabling ATI Graphics or updating the BIOS firmware. If neither of these methods work, you may need to seek further assistance from a qualified IT professional.

Did this fix your problem?

If not, try searching for specific error codes.

🔍 Search Error Database

❓ Frequently Asked Questions

🛠️ Related Fixes

How to Fix: Pc crashes shortly after launching game (rainbow

Fix Pc crashes shortly after launching game (rainbow six siege). Compl

How to Fix: Installing an APK on a locked down phone

Installing an APK on a locked down phone: Try using a rooted device, e

How to Fix: New PC build- no signal and no clue

Fix New PC build- no signal and no clue. Complete troubleshooting guid