Software⏱️ 4 min read📅 2026-06-19

How to Fix: DVD recording fails with "Power Calibration Error" or "Internal Target Failure"

Pioneer DVR-215 DVD recording issue with Power Calibration Error and Internal Target Failure, possible software/driver problem related to Windows 32-bit vs. 64-bit mode.

Quick Answer: Check for firmware updates, reinstall drivers, and try burning with a different media brand or speed.

📋 Table of Contents

  1. ⚠️ Common Causes
  2. 🔧 Proven Troubleshooting Steps
  3. 🎯 Final Words

The Pioneer DVR-215 DVD recorder is experiencing issues with recording DVDs, resulting in 'Power Calibration Error' or 'Internal Target Failure' messages. This problem affects users running Windows 7 64-bit, specifically those who have previously used the same device on Windows XP (32 bit). The error is frustrating because it prevents users from burning CDs and DVDs as intended.

This troubleshooting guide aims to help resolve the issue by identifying potential root causes and providing two primary fix methods. By following these steps, users should be able to overcome the 'Power Calibration Error' or 'Internal Target Failure' messages and resume DVD recording with their Pioneer DVR-215.

⚠️ Common Causes

  • The primary reason for this error is a software/driver issue related to the firmware version of the Pioneer DVR-215. The current firmware version (1.22) may not be compatible with Windows 7 64-bit, causing issues with DVD recording. Additionally, the use of Verbatim media with manufacturer ID MCC03RG20, which was previously used without any problems, might also contribute to this issue.
  • An alternative reason could be a compatibility problem between the DVD recorder's hardware and the Windows 7 64-bit operating system. The 32-bit version of Windows XP had no such issues, suggesting that there may be a difference in how the 64-bit version handles the DVD recorder's hardware.

🔧 Proven Troubleshooting Steps

Updating Firmware and Drivers

  1. Step 1: Visit the Pioneer website to check for any firmware updates for the DVR-215. If an update is available, download and install it according to the manufacturer's instructions.
  2. Step 2: After updating the firmware, visit the Pioneer website or a reputable third-party driver website (such as Nero or DeepBurner) to download and install the latest drivers for the DVD recorder's hardware. Ensure that the correct version of the driver is installed for Windows 7 64-bit.
  3. Step 3: Once both the firmware and drivers are up-to-date, restart the computer and attempt to burn a DVD using the Pioneer DVR-215.

Using an Alternative Software or Driver

  1. Step 1: Try using an alternative software for burning DVDs, such as Nero Burning ROM or ImgBurn. These programs may be able to bypass any compatibility issues with Windows 7 64-bit and the Pioneer DVR-215's hardware.
  2. Step 2: If using an alternative software does not resolve the issue, try installing a different driver version that is specifically designed for Windows 7 64-bit. This may help resolve any hardware-related compatibility problems.

🎯 Final Words

By following these steps, users should be able to identify and potentially resolve the 'Power Calibration Error' or 'Internal Target Failure' messages when using their Pioneer DVR-215 DVD recorder with Windows 7 64-bit. If issues persist, it may be necessary to contact Pioneer support for further assistance.

Did this fix your problem?

If not, try searching for specific error codes.

🔍 Search Error Database

❓ Frequently Asked Questions

🛠️ Related Fixes

How to Fix: Pc crashes shortly after launching game (rainbow

Fix Pc crashes shortly after launching game (rainbow six siege). Compl

How to Fix: Installing an APK on a locked down phone

Installing an APK on a locked down phone: Try using a rooted device, e

How to Fix: New PC build- no signal and no clue

Fix New PC build- no signal and no clue. Complete troubleshooting guid