Hardware⏱️ 4 min read📅 2026-06-11

How to Fix Error 2100 Error – Error 2100: Detection error on HDD0 (Main HDD) - Lenovo Twist

Error 2100 detection error on HDD0 (Main HDD) - Lenovo Twist

Quick Answer: Try booting in safe mode or using a different storage device to isolate the issue.

📋 Table of Contents

  1. 🔍 Why This Happens
  2. ✅ Best Solutions to Fix It
  3. 💡 Conclusion

Error 2100: Detection error on HDD0 (Main HDD) is a common issue affecting Lenovo Twist users. When the system boots, it displays the LENOVO logo and prompts to press Enter to interrupt normal startup. Following this prompt, the system shows '2100: Detection error on HDD0 (Main HDD)', indicating a problem with the main hard drive (HDD0). This error can be frustrating as it prevents the system from booting into Windows and forces users to navigate through the Boot Menu.

This issue is particularly vexing because it often doesn't resolve itself, even when no error message is displayed. Users may find that certain options in the Boot Menu are missing or change frequently, adding to the confusion. Fortunately, there are steps you can take to troubleshoot and potentially fix this problem.

🔍 Why This Happens

  • The primary cause of Error 2100 on Lenovo Twist devices is a faulty or failing hard drive (HDD0). Over time, mechanical parts within the hard drive can deteriorate, leading to errors in detection. This issue may be exacerbated by physical shock, overheating, or exposure to extreme temperatures.
  • Another possible reason for this error is a misconfigured BIOS setting. In some cases, the system's BIOS settings may not correctly identify the main hard drive (HDD0), causing the '2100: Detection error' message to appear.

✅ Best Solutions to Fix It

Safe Boot with Minimal Components

  1. Step 1: Restart your Lenovo Twist device and immediately start pressing the F2 key repeatedly while it boots up. This will open the BIOS Setup utility.
  2. Step 2: In the BIOS Setup utility, navigate to the Advanced tab and locate the 'Boot Priority' or 'Boot Order' option. Move the main hard drive (HDD0) from the top of the list to the bottom and save your changes.
  3. Step 3: Now, set the boot order so that the first device to check is the internal SSD (if present), followed by the USB drives, and finally the main hard drive (HDD0). Save these changes and exit the BIOS Setup utility. Press Enter to resume normal startup.

BIOS Reset and HDD Reinstallation

  1. Step 1: Restart your Lenovo Twist device and immediately start pressing the F11 key repeatedly while it boots up. This will open the Advanced Boot Options menu.
  2. Step 2: Select 'Reset to Factory Settings' from the drop-down menu and follow any on-screen instructions to complete the process. Note that this will erase all data on the system, so ensure you back up any important files before proceeding.
  3. Step 3: Once the reset is complete, disconnect any external devices (including USB drives) and press Enter to resume normal startup. Then, remove the main hard drive (HDD0) from its current position in the chassis and reinsert it into a different slot. Reconnect any external devices you disconnected earlier and try booting up again.

💡 Conclusion

If neither of these methods resolves the issue, you may want to consider seeking further assistance from Lenovo support or a professional IT technician. It's also essential to monitor your hard drive for signs of failure, such as unusual noises, vibrations, or decreased performance.

Did this fix your problem?

If not, try searching for specific error codes.

🔍 Search Error Database

❓ Frequently Asked Questions

🛠️ Related Fixes

How to Fix: hidden network issues by identifying and removin

Resolve hidden network issues by identifying and removing a problemati

How to Fix: Discover why your SSD's full volume space isn't

Fix Discover why your SSD's full volume space isn't showing up in Disk

How to Fix: Lenovo LOQ performance issues by updating driver

Resolve Lenovo LOQ performance issues by updating drivers, running a d