Hardware⏱️ 3 min read📅 2026-06-11

How to Fix Error code 43 Error – Some USB devices are disabled after rebooting into Windows 7 from Ubuntu (Error code 43)

Error code 43 occurs after booting into Ubuntu and affects Saitek devices.

Quick Answer: Update BIOS to latest version, disable USB selective suspend feature in Windows.

📋 Table of Contents

  1. 🔍 Why This Happens
  2. 🔧 Proven Troubleshooting Steps
  3. 💡 Conclusion

Some users are experiencing an issue with their USB devices being disabled after rebooting into Windows 7 from Ubuntu, resulting in an error code of 43. This problem affects users who have dual-booted their systems with both Windows 7 and Ubuntu 14.04.

This frustration can be resolved by following a step-by-step guide to identify the root cause and apply the necessary fixes.

🔍 Why This Happens

  • The primary reason for this issue is that the Windows drivers for the Saitek devices are not properly installed or configured in the Linux system. When the user boots into Ubuntu, the drivers are not loaded, causing the devices to be recognized as unknown. This results in the error code 43 being displayed when trying to access the device properties.
  • Another possible cause is that the Linux kernel has issues with the USB driver for the Saitek devices, leading to the incorrect identification of the devices. In this case, the issue may be specific to the version of Ubuntu being used.

🔧 Proven Troubleshooting Steps

Updating Windows drivers

  1. Step 1: Step 1: Open the Device Manager in Windows 7 by pressing Win + X and selecting Device Manager. Expand the 'Human Interface Devices' section and look for the Saitek devices. Right-click on each device and select 'Update driver'.

Updating Linux kernel and USB drivers

  1. Step 1: Step 1: Update the Linux kernel to the latest version using the command `sudo apt-get update && sudo apt-get upgrade` in a terminal. This may help resolve issues with the USB driver.
  2. Step 2: Step 2: Install the necessary USB drivers for the Saitek devices using the following commands: `sudo apt-get install linux-firmware-tools` and then `sudo modprobe -r saitek` followed by `sudo modprobe saitek`.

💡 Conclusion

To resolve the issue of USB device being disabled after rebooting into Windows 7 from Ubuntu, users can try updating their Windows drivers or Linux kernel and USB drivers. By following these steps, users should be able to identify and fix the root cause of the problem.

Did this fix your problem?

If not, try searching for specific error codes.

🔍 Search Error Database

❓ Frequently Asked Questions

🛠️ Related Fixes

How to Fix: hidden network issues by identifying and removin

Resolve hidden network issues by identifying and removing a problemati

How to Fix: Discover why your SSD's full volume space isn't

Fix Discover why your SSD's full volume space isn't showing up in Disk

How to Fix: Lenovo LOQ performance issues by updating driver

Resolve Lenovo LOQ performance issues by updating drivers, running a d