Hardware⏱️ 4 min read📅 2026-06-15

How to Fix: How bad is Error Rates in HDD?

Transcend HDD experiencing slowness despite showing GOOD status in CrystalDiskInfo.

Quick Answer: Check for physical issues, dust buildup, or firmware updates to resolve the problem.

📋 Table of Contents

  1. 🛑 Root Causes of the Error
  2. ✅ Best Solutions to Fix It
  3. 🎯 Final Words

Error Rates in HDD refer to the occurrence of errors in Hard Disk Drives (HDDs), which can cause slowness, data loss, or complete failure. This issue affects users who rely on their HDDs for storing and accessing data, making it frustrating when performance is compromised.

The slow performance caused by Error Rates in HDDs can be attributed to various factors, including mechanical wear and tear, power supply issues, or even user error. In this guide, we will explore the root causes of this issue and provide steps to help you identify and potentially fix the problem.

🛑 Root Causes of the Error

  • The first main reason why Error Rates in HDDs happen is due to mechanical wear and tear. Over time, the mechanical components of the drive, such as the motor, bearings, and platters, can deteriorate, leading to increased error rates. This is especially true for older drives like your 5400 RPM Transcend HDD with 4267 power-on hours and 1605 power-on count.
  • Another alternative reason for Error Rates in HDDs could be power supply issues. If the power supply unit (PSU) is not providing stable or sufficient power to the drive, it can cause errors and slow performance.

✅ Best Solutions to Fix It

Checking and Cleaning Dust from the Drive

  1. Step 1: Open your computer case and locate the HDD. Use a soft-bristled brush or compressed air to gently remove any dust or debris that may be accumulated on the drive's exterior and internal components.
  2. Step 2: Use a can of compressed air to blow out any remaining dust or debris from the drive's vents and fans. Be cautious not to touch any electrical components with the can.
  3. Step 3: Once you've cleaned the drive, ensure it is properly seated in its bay and that all cables are securely connected.

Running Diagnostic Tests

  1. Step 1: Download and install a diagnostic tool like CrystalDiskInfo or HD Tune to check for any errors or issues with your HDD.
  2. Step 2: Run the diagnostic test on your HDD using the installed tool. This will help identify if there are any mechanical or power supply issues that may be causing the slow performance.
  3. Step 3: Take note of the results and compare them to the recommended values in the CrystalDiskInfo report you provided.

🎯 Final Words

If you've identified a potential issue with your HDD, such as mechanical wear and tear or power supply issues, taking steps to clean dust from the drive and run diagnostic tests can help identify and potentially fix the problem. However, if the issue persists, it may be time to consider replacing your HDD with a newer model.

Did this fix your problem?

If not, try searching for specific error codes.

🔍 Search Error Database

❓ Frequently Asked Questions

🛠️ Related Fixes

How to Fix: hidden network issues by identifying and removin

Resolve hidden network issues by identifying and removing a problemati

How to Fix: Discover why your SSD's full volume space isn't

Fix Discover why your SSD's full volume space isn't showing up in Disk

How to Fix: Lenovo LOQ performance issues by updating driver

Resolve Lenovo LOQ performance issues by updating drivers, running a d