Software⏱️ 3 min read📅 2026-06-15

How to Fix: How to get rid of UDP checksum error messages in virtual console?

Preventing UDP checksum error messages in virtual console on Ubuntu.

Quick Answer: Disable IP forwarding and set the system to use a static IP address.

📋 Table of Contents

  1. 🛑 Root Causes of the Error
  2. 🛠️ Step-by-Step Verified Fixes
  3. 💡 Conclusion

The UDP checksum error message is typically seen in Linux systems, particularly when using virtual consoles. This issue affects users who are streaming videos or running applications that send UDP packets over Ethernet connections.

This error can be frustrating because it may interrupt the user's workflow, especially if they are working on critical tasks. However, since the video is streaming okay, it suggests that the issue might not be related to the application itself but rather with the system's handling of UDP packets.

🛑 Root Causes of the Error

  • The primary reason for this error is due to a misconfiguration in the network stack. When sending UDP packets over Ethernet connections, Linux uses a technique called 'checksum validation' to ensure data integrity. However, if the checksum calculation fails, it results in an error message being printed to the console.
  • Another possible cause could be related to the system's kernel configuration or the specific Ethernet adapter being used. In some cases, issues with the network interface or outdated drivers may lead to this error.

🛠️ Step-by-Step Verified Fixes

Disabling UDP checksum validation

  1. Step 1: To disable UDP checksum validation, you can use the `ip` command to set the `mtu` (Maximum Transmission Unit) value for the Ethernet interface. Run the following command: `sudo ip link set eth0 mtu 1500`. This will enable the MTU value that is commonly used on Linux systems.
  2. Step 2: Alternatively, you can also disable checksum validation using the `sysctl` command. Run the following command: `sudo sysctl -w net.ipv4.ip_forward=1 && sudo sysctl -w net.ipv4.conf.all.send_mss 1500`. This will enable IP forwarding and set the MTU value for all interfaces.
  3. Step 3: After making these changes, restart your system or reload the network configuration to apply the new settings.

Configuring the Ethernet adapter

  1. Step 1: To resolve this issue on a specific Ethernet adapter, you can try reconfiguring the network interface. Run the following command: `sudo ip link set eth0 down && sudo ip link set eth0 up`. This will reset the network interface to its default settings.
  2. Step 2: Alternatively, you can also try updating the Ethernet adapter's drivers or firmware to the latest version. You can check for updates in your system's package manager or by visiting the manufacturer's website.

💡 Conclusion

By following these steps, you should be able to prevent UDP checksum error messages from being printed to the console when using virtual consoles on Ubuntu. If the issue persists after trying these methods, it may be worth consulting with a system administrator or seeking further assistance.

Did this fix your problem?

If not, try searching for specific error codes.

🔍 Search Error Database

❓ Frequently Asked Questions

🛠️ Related Fixes

How to Fix: Pc crashes shortly after launching game (rainbow

Fix Pc crashes shortly after launching game (rainbow six siege). Compl

How to Fix: Installing an APK on a locked down phone

Installing an APK on a locked down phone: Try using a rooted device, e

How to Fix: New PC build- no signal and no clue

Fix New PC build- no signal and no clue. Complete troubleshooting guid