Hardware⏱️ 3 min read📅 2026-06-11

How to Fix: Intel SRT / RST gives "no boot device" error after two reboots

Intel SRT/RST issues with RAID configuration and boot device problem

Quick Answer: Try disabling Intel Rapid Storage Technology (IRST) or removing the acceleration drive to resolve the issue.

📋 Table of Contents

  1. 🛑 Root Causes of the Error
  2. 🚀 How to Resolve This Issue
  3. 🎯 Final Words

The Intel SRT (Smart Response Technology) and RST (Rapid Storage Technology) have been known to cause issues in certain configurations, leading to a 'no boot device' error. This error typically affects users who have installed the Intel IRST software and enabled Smart Response for their RAID1 array.

This issue can be frustrating as it may lead to data loss if not addressed promptly. In this guide, we will walk through the steps to troubleshoot and potentially fix the 'no boot device' error caused by Intel SRT/RST.

🛑 Root Causes of the Error

  • The primary reason for this error is that the Intel IRST software may have corrupted the BIOS settings or the RAID configuration. This can happen when the software is not properly installed, configured, or updated.
  • An alternative cause could be a conflict between the SRT/RST and other hardware components in the system, such as the graphics card drivers.

🚀 How to Resolve This Issue

Reinstalling the Intel IRST Software

  1. Step 1: Uninstall the Intel IRST software from the system. This can be done by going to the Control Panel > Programs and Features (or Add/Remove Programs in older Windows versions) and selecting the Intel IRST software to uninstall.
  2. Step 2: Reboot the system after uninstalling the software to ensure all changes take effect.
  3. Step 3: Wait for 10-15 minutes before proceeding to the next step.

Resetting the BIOS Settings

  1. Step 1: Enter the BIOS setup by pressing the key indicated in the system's manual (usually F2, F12, or Del).
  2. Step 2: Navigate to the Advanced Tab and select the 'Boot Order' option. Ensure that the RAID1 array is set as the first boot device.
  3. Step 3: Save the changes and exit the BIOS setup.

🎯 Final Words

To resolve the 'no boot device' error caused by Intel SRT/RST, it is recommended to try both methods: reinstalling the Intel IRST software and resetting the BIOS settings. If the issue persists after trying these steps, further troubleshooting may be necessary.

Did this fix your problem?

If not, try searching for specific error codes.

🔍 Search Error Database

❓ Frequently Asked Questions

🛠️ Related Fixes

How to Fix: hidden network issues by identifying and removin

Resolve hidden network issues by identifying and removing a problemati

How to Fix: Discover why your SSD's full volume space isn't

Fix Discover why your SSD's full volume space isn't showing up in Disk

How to Fix: Lenovo LOQ performance issues by updating driver

Resolve Lenovo LOQ performance issues by updating drivers, running a d