Hardware⏱️ 3 min read📅 2026-06-15

How to Fix: Repair raid after bad suspension (Error Occurred 0)

Error fixing a Zenbook with RAID issues after suspension in Xubuntu 14.04.

Quick Answer: Check the BIOS settings and ensure the RAID configuration is set to 'Auto' or 'Enabled'. If not, try resetting the RAID configuration to its default state.

📋 Table of Contents

  1. 🔍 Why This Happens
  2. ✅ Best Solutions to Fix It
  3. 💡 Conclusion

The error 'Repair RAID after bad suspension (Error Occurred 0)' is a common issue that affects users of Zenbook laptops running Xubuntu 14.04. This error occurs when the laptop's BIOS detects a problem with the RAID configuration, which can be caused by a faulty suspension or power failure. The error prevents the laptop from booting into either Xubuntu or Windows, leading to frustration and inconvenience.

The primary goal of this troubleshooting guide is to help users resolve the 'Repair RAID after bad suspension (Error Occurred 0)' error without formatting the laptop's hard drive. By following the steps outlined in this guide, users can safely repair their RAID configuration and regain access to their operating systems.

🔍 Why This Happens

  • The primary root cause of this error is a faulty RAID configuration that has been damaged by a bad suspension or power failure. This can occur when the laptop's hard drive is exposed to physical shock, vibration, or electrical surges during the suspension period. As a result, the RAID configuration becomes corrupted, leading to the 'Repair RAID after bad suspension (Error Occurred 0)' error.
  • An alternative root cause of this error is a BIOS issue that prevents the laptop from detecting the correct RAID configuration. This can occur when the BIOS firmware becomes outdated or corrupted, leading to incorrect detection of the hard drive's configuration.

✅ Best Solutions to Fix It

Boot Recovery Mode

  1. Step 1: Press and hold the power button for 30 seconds to discharge any residual power in the laptop.
  2. Step 2: Release the power button and immediately press and hold the 'Ctrl+I' keys simultaneously. This will boot the laptop into the BIOS recovery mode.
  3. Step 3: Navigate to the Advanced Tab and select the 'Boot Order' option. Ensure that the Windows or Xubuntu drive is set as the first boot device. Save the changes and exit the BIOS recovery mode.

RAID Configuration Repair

  1. Step 1: Open a terminal and run the command `sudo raidctl repair` to initiate the RAID configuration repair process.
  2. Step 2: The repair process may take several minutes to complete. Monitor the progress of the repair process and wait for it to finish. Once completed, restart the laptop and attempt to boot into Windows or Xubuntu.

💡 Conclusion

By following these steps, users should be able to resolve the 'Repair RAID after bad suspension (Error Occurred 0)' error without formatting the laptop's hard drive. If the issue persists, it may be necessary to seek further assistance from a professional technician or manufacturer support.

Did this fix your problem?

If not, try searching for specific error codes.

🔍 Search Error Database

❓ Frequently Asked Questions

🛠️ Related Fixes

How to Fix: hidden network issues by identifying and removin

Resolve hidden network issues by identifying and removing a problemati

How to Fix: Discover why your SSD's full volume space isn't

Fix Discover why your SSD's full volume space isn't showing up in Disk

How to Fix: Lenovo LOQ performance issues by updating driver

Resolve Lenovo LOQ performance issues by updating drivers, running a d