How to Fix: System wont boot..."rmi4_f34: probe of rmi4-00.fn34 failed with error -22" How can I go about fixing this?
Linux boot issue with rmi4_f34 probe error -22, unable to upgrade or update system.
📋 Table of Contents
The system won't boot due to an error in the 'rmi4_f34: probe of rmi4-00.fn34 failed with error -22' message, which indicates a driver issue. This error affects users who have recently updated their system using 'sudo apt update & sudo apt upgrade -y'. The frustrating part is that the system boots successfully in safe mode, but not when trying to boot normally.
This error can be caused by various factors, including outdated or corrupted drivers, incorrect bootloader settings, or issues with the system's configuration. In this guide, we will walk through the steps to diagnose and fix this issue.
⚠️ Common Causes
- The primary cause of this error is an unrecognized bootloader version (13) that is not supported by the system. This can be caused by a corrupted or outdated bootloader, which needs to be updated or replaced.
- Another possible cause could be issues with the 'rmi4_f34' driver, which might require updating or reinstalling.
🛠️ Step-by-Step Verified Fixes
Update the bootloader
- Step 1: Open a terminal and run the command 'sudo apt update' to ensure that the package list is up-to-date.
- Step 2: Run the command 'sudo apt upgrade -y' to upgrade all installed packages, including the bootloader. This may take some time depending on the number of packages being updated.
- Step 3: Once the upgrade process is complete, reboot the system using 'sudo reboot'.
Update or reinstall the 'rmi4_f34' driver
- Step 1: Use the command 'dmesg | grep rmi4_f34' to check for any error messages related to the 'rmi4_f34' driver. This will help identify if there are any issues with the driver that need to be addressed.
- Step 2: If the driver is outdated or corrupted, run the command 'sudo apt install --reinstall linux-firmware-rmi4' to reinstall the driver. If this fails, try running 'sudo dpkg --purge linux-firmware-rmi4' followed by 'sudo apt install linux-firmware-rmi4'.
✨ Wrapping Up
After following these steps, you should be able to boot your system normally without encountering the 'rmi4_f34: probe of rmi4-00.fn34 failed with error -22' message. If you are still experiencing issues, it may be necessary to seek further assistance from a Linux expert or the system manufacturer's support team.
❓ Frequently Asked Questions
🛠️ Related Fixes
How to Fix: Pc crashes shortly after launching game (rainbow
Fix Pc crashes shortly after launching game (rainbow six siege). Compl
How to Fix: Installing an APK on a locked down phone
Installing an APK on a locked down phone: Try using a rooted device, e
How to Fix: New PC build- no signal and no clue
Fix New PC build- no signal and no clue. Complete troubleshooting guid