Hardware⏱️ 4 min read📅 2026-06-11

How to Fix: USB Hub Error -62

USB hub error -62: possible causes and solutions.

Quick Answer: The issue is likely caused by the long USB cable with a repeater, which may be causing signal degradation or interference. Try using a shorter cable or replacing the repeater to resolve the issue.

📋 Table of Contents

  1. 🛑 Root Causes of the Error
  2. ✅ Best Solutions to Fix It
  3. ✨ Wrapping Up

The USB Hub Error -62 is an issue that affects users who are trying to connect long USB cables, such as those with repeaters or hubs, to embedded devices like Linux DeBARM boards running kernel 2.6. This error occurs when the device cannot properly detect and communicate with the connected USB devices due to a faulty hub status report.

This issue can be frustrating for users who rely on long USB cables for their work or daily activities. In this guide, we will explore possible root causes of the USB Hub Error -62 and provide steps to resolve the issue.

🛑 Root Causes of the Error

  • The primary reason for the USB Hub Error -62 is due to a faulty hub status report generated by the hub itself. This report is used by the device to determine the number of active ports on the hub and whether it can be used as a bus. When the hub fails to generate this report correctly, the device cannot properly detect and communicate with connected USB devices.
  • An alternative reason for the error could be related to the length of the USB cable or the repeater used. Long cables may cause signal degradation or interference that affects the hub's ability to generate a correct status report.

✅ Best Solutions to Fix It

Disable Repeater and Directly Connect the Cable

  1. Step 1: Disconnect the repeater from the USB cable and plug it directly into the embedded device. This will allow you to determine if the issue is related to the repeater or the hub.
  2. Step 2: If the cable works properly when connected directly, then the issue is likely with the repeater. If the error persists, try replacing the repeater with a new one to rule out any manufacturing defects.
  3. Step 3: Once you have determined that the issue is not with the cable itself, try connecting it through multiple hubs or devices to see if the problem persists. This will help you identify if the hub is faulty or if there's an issue with the connection between the hub and the device.

Disable Hub Features and Use a Shorter Cable

  1. Step 1: Try disabling any advanced features of the USB hub, such as power management or bus switching. This may help stabilize the hub's status report and resolve the error.
  2. Step 2: If you are able to connect the cable using a shorter length or without a repeater, try using a different type of USB cable or connector to see if that resolves the issue.

✨ Wrapping Up

To resolve the USB Hub Error -62, it is recommended to first try disabling the repeater and connecting the cable directly to the embedded device. If the error persists, you can try disabling hub features or using a shorter length of cable. By following these steps, you should be able to identify and fix the root cause of the issue.

Did this fix your problem?

If not, try searching for specific error codes.

🔍 Search Error Database

❓ Frequently Asked Questions

🛠️ Related Fixes

How to Fix: hidden network issues by identifying and removin

Resolve hidden network issues by identifying and removing a problemati

How to Fix: Discover why your SSD's full volume space isn't

Fix Discover why your SSD's full volume space isn't showing up in Disk

How to Fix: Lenovo LOQ performance issues by updating driver

Resolve Lenovo LOQ performance issues by updating drivers, running a d