The primary reason for this issue is a faulty USB connection or a problem with the keyboard's drivers. The keyboard may not be properly recognized by the system, leading to input errors.Another possible cause could be a conflict between the keyboard and other devices connected to the same port, caus

How do I fix: 🚀 How to Resolve This Issue Hardware Troubleshooting?

Step 1: Step 1: Try unplugging the keyboard from its current USB port and plugging it into a different port on the same device. This may resolve any connectivity issues.Step 2: Step 2: If the above step doesn't work, try using a different USB port on another device to rule out any issues with the sp

How do I fix: Software Troubleshooting?

Step 1: Step 1: Check for any kernel updates and install the latest version of your Linux distribution.Step 2: Step 2: Run the command 'lsusb -v' to check if the keyboard is properly recognized by the system. If it's not, try running the command 'sudo modprobe -r usbhid' followed by 'sudo modprobe u

Hardware⏱️ 3 min read📅 2026-06-19

How to Fix: USB keyboard randomly stops working (can't reset device error: -32)

Random USB keyboard disconnection issue with CM Storm QuickFire Rapid keyboard.

Quick Answer: Try resetting the kernel module for the keyboard device, or replacing the faulty USB cable.

📋 Table of Contents

⚠️ Common Causes
🚀 How to Resolve This Issue
💡 Conclusion

The CM Storm QuickFire Rapid keyboard randomly stops working, causing input issues and frustration. This problem affects users who rely on their keyboards for daily tasks.

Troubleshooting this issue requires patience and persistence. We will guide you through the steps to resolve the 'can't reset device error: -32' issue.

⚠️ Common Causes

The primary reason for this issue is a faulty USB connection or a problem with the keyboard's drivers. The keyboard may not be properly recognized by the system, leading to input errors.
Another possible cause could be a conflict between the keyboard and other devices connected to the same port, causing the system to misinterpret the keyboard's signals.

🚀 How to Resolve This Issue

Hardware Troubleshooting

Step 1: Step 1: Try unplugging the keyboard from its current USB port and plugging it into a different port on the same device. This may resolve any connectivity issues.
Step 2: Step 2: If the above step doesn't work, try using a different USB port on another device to rule out any issues with the specific port.
Step 3: Step 3: If none of the above steps resolve the issue, try using a USB hub or adapter to connect the keyboard. This can help isolate any issues with the device itself.

Software Troubleshooting

Step 1: Step 1: Check for any kernel updates and install the latest version of your Linux distribution.
Step 2: Step 2: Run the command 'lsusb -v' to check if the keyboard is properly recognized by the system. If it's not, try running the command 'sudo modprobe -r usbhid' followed by 'sudo modprobe usbhid'.

💡 Conclusion

If none of the above steps resolve the issue, you may want to consider updating your kernel or using a different keyboard driver. Additionally, if you're still experiencing issues, you can try resetting the BIOS settings to their default values and re-seating the keyboard.

Did this fix your problem?

If not, try searching for specific error codes.

🔍 Search Error Database

❓ Frequently Asked Questions

🛠️ Related Fixes

How to Fix: hidden network issues by identifying and removin

Resolve hidden network issues by identifying and removing a problemati

How to Fix: Discover why your SSD's full volume space isn't

Fix Discover why your SSD's full volume space isn't showing up in Disk

How to Fix: Lenovo LOQ performance issues by updating driver

Resolve Lenovo LOQ performance issues by updating drivers, running a d